Sovereign class
From Memory Alpha, the free Star Trek reference.
| Sovereign-class | |
| |
| Affilitation: | Federation Starfleet |
| Length: | 685 meters |
| Beam: | 250 meters |
| Height: | 88 meters |
| Decks: | 24 (original configuration), 29 (refit) |
| Maximum Cruising Speed: | Warp 9.985 |
| Armament (standard): | 16 phaser arrays 4 forward torpedo launchers 6 aft torpedo launchers, firing both Photon torpedoes and Quantum torpedoes |
| Defenses: | Deflector shields |
The Sovereign-class starship was introduced in the late 24th century, showcasing some of Starfleet's most recent technological advances. The Sovereign Project was one of the new defensive technologies initially intended for use against the Borg threat. The prototype USS Sovereign was still in the design phase during the Battle of Wolf 359.
Heavily armed, the design philosophy for the Sovereign-class was shaped by the discovery of the Borg. The Sovereign Project attempted to push the envelope as far as possible when it came to computer power, shields, armament, and systems capabilities. The Sovereign-class starship combined the creature comforts associated with the larger Galaxy-class vessels with the tactical power of the new Prometheus-class. (Star Trek: First Contact)
The warp engines of the Sovereign were of a new design which eliminated subspace distortion effects inherent to standard warp drives without the use of variable geometry nacelles (as found on the Intrepid-class – see also Hekaras Corridor). (Star Trek Nemesis) In addition, it was armed with a large quantum torpedo launcher mounted forward of the deflector dish above the captain's yacht, which was capable of firing at least four rounds per second. (Star Trek: First Contact)
Contents |
[edit] Class history
In 2372, the Sovereign-class USS Enterprise-E was launched from drydock. At least one other, the class prototype USS Sovereign, is in service.
One of the Sovereign-class' first major engagements came in 2373, when the USS Enterprise saw action in the Borg incursion into Sector 001, and was instrumental in the destruction of the attacking cube. (Star Trek: First Contact)
In 2375, the crew of the Enterprise became embroiled in a plot by the Son'a, assisted by Starfleet Admiral Matthew Dougherty, to forcibly remove the Ba'ku from their isolated home in the Briar Patch. The Son'a planned to harvest metaphasic radiation from the planet's ring system, and needed Starfleet cooperation to carry out the plan.
Captain Jean-Luc Picard felt the relocation of the Ba'ku was a severe violation of the Prime Directive, and led a team of Enterprise crewmembers to the Ba'ku planet to prevent their capture and removal.
Commander William Riker was instructed to take the Enterprise and contact the Federation Council to alert them to the realities of the situation. It was a treacherous journey, since the Briar Patch interfered with external communications as well as the ship's impulse drive.
Two Son'a battle cruisers were sent by Ahdar Ru'afo to intercept the Enterprise before it left the Briar Patch, and severely damaged the ship in the process. The warp core was ejected in order to seal a dangerous tear in subspace created by the isolytic weaponry of the Son'a.
Riker was able to outsmart the Son'a by collecting metreon gas native to the Briar Patch, then venting it behind the ship. When the Son'a used their weapons, the gas exploded, destroying one ship and severely damaging the other. The Enterprise then convinced the Federation Council to reconsider the plan for the Ba'ku. This tactic was labeled by Geordi La Forge as the Riker maneuver. (Star Trek: Insurrection)
Shortly after the resolution of the Dominion War, a refitting of the Sovereign-class took place. The major changes included adding 5 decks, 5 additional torpedo tubes and 4 additional phaser arrays. A slight change in the warp nacelle pylons was also implemented. The Enterprise was able to deploy these new systems in 2379 when it faced the Reman Scimitar in the Bassen Rift.
In the ensuing confrontation, the Enterprise was severely damaged, including a major hull breach on the bridge. It was still unable to stop the Scimitar.
As a last resort, Picard ordered the Enterprise to ram the Scimitar, causing the destruction of much of the saucer section's forward area. The collision disabled the Scimitar, but Shinzon, driven by vengeance, activated his deadly thalaron weapon and trained it on the Enterprise.
The weapon was overloaded and the Scimitar destroyed due to interference from Commander Data, who sacrificed himself to save the Enterprise. The ship then returned to Earth, and was required to go through several weeks of extensive drydock repair. (Star Trek Nemesis)
[edit] Technical Data
The Sovereign-class had two hull sections: a saucer-shaped primary hull and a secondary hull which mounted the two warp nacelles. In terms of deck layout, the upper sections of the Sovereign-class starship formed the command section and living areas, while the lower decks housed main engineering and fuel supplies.
The Sovereign-class starship was 685 meters long, and packed a huge amount of equipment, systems, and materials into its 29 decks.
As is traditional, deck numbering descended from top to bottom. At the top of the saucer section was Deck 1, which housed the main bridge. This deck also held the more recent modifications of an observation lounge, a ready room for the ship's captain, and an airlock with attached cabin.
Deck 2 encompassed the first of the many levels of crew quarters, with rooms for the highest-ranking command staff and an officer's mess hall. Decks 3 through 9 featured more officers' quarters, the forward and aft viewing lounges, science labs, the main shuttlebay, conduits for the optical data network, and the vessel's main computer core.
Decks 10 through 14 completed the primary hull of the Sovereign-class starship, and also encompassed forward and aft cargo bays on Decks 10 and 11, and phaser systems on Deck 11. Sensors and the secondary navigational deflector were found on Deck 12.
Deck 14 was largely dedicated to engineering systems, and also featured the lower sensor platform. Decks 15 through 18 comprised the main navigational deflector array and an auxiliary bridge, which was also known as the battle bridge.
Deck 13, which was taken up almost entirely by deuterium fuel tanks, marked the real split between the habitable areas and the engineering and ship's storage sections. Main engineering and its related systems – such as the EPS power tabs, the central matter/antimatter reaction chamber, support labs, and the engineering computer core – were spread over Decks 14 through 18.
Deck 16 also featured the launch and retrieval mechanism for the captain's yacht. The yacht was lowered by a set of gantries until its engines extended to operational position and then it would be free to maneuver.
Moving down to the lowest levels of the ship, Decks 24 and 25 contained the launch and loader mechanisms for the secondary hull's complement of quantum torpedoes and unmanned probes (fore and aft), while Deck 27 housed the fore and aft tractor beam emitters. The antimatter reactant generator and storage pods were housed on Decks 28 and 29, along with the Ventral phaser array.
[edit] Command and control systems
The computer system onboard the Sovereign-class were bio-neural gel pack based. Computer systems were concentrated in two computer cores. The primary core was located directly below the main bridge on Decks 6 through 8. The secondary core was located in the engineering section, adjacent to environmental control, on Decks 15 through 17.
Primary operational control of the ship was provided by the main bridge, located at the top of the primary hull. The bridge directly supervised all primary mission operations and coordinated all departmental activities.
The central area of the main bridge provided seating and information displays for the captain and two other officers. The captain's chair was raised from the rest of the bridge officers to the height of the surrounding level, which included tactical and operations. The two officer seats were equipped with fully programmable consoles for a variety of uses.
Directly fore of the command area was the conn officer, who faced the main viewer. To the port side of the conn officer, also facing the main viewscreen, was the operations manager's console, which was identical in size and design to the helm station.
At the very front of the bridge chamber was a large viewscreen. When the screen was not active, a standard bulkhead was present.
Aft and to the left of the command area was an elevated platform on which tactical and security consoles were located. To the captain's right, behind the tactical console, was the mission operations section of the bridge. Against the starboard side walls of the main bridge were the consoles for sciences, along with others that were programmable for a multitude of functions.
Located against the aft wall of the bridge was a large master systems display monitor, similar to the one in engineering. All relevant ship information (such as damage, power distribution, etc.) could be displayed on this cutaway image of the vessel. This monitor could be used to direct ship operations and could be configured for limited flight control if necessary.
Also located against the aft wall of the main bridge was the large engineering console. This had a smaller cutaway diagram of the vessel, which displayed all engineering-relevant data and showed warp fields and engine output.
There were two turbolifts on the bridge. There was also an emergency ladder that connected the bridge to lower decks. Additionally, the bridge provided direct access to the observation lounge, which was located directly aft of the bridge, and the captain's ready room. (Star Trek: First Contact)
[edit] Captain's Ready Room
The captain's ready room doubled as an office and a second private cabin in addition to the commanding officer's private quarters. It was located off the starboard side of the main bridge on Deck 1, and provided a place where the captain could work or rest while remaining next to the bridge in case of an emergency. Meetings between the captain and one or two people would also take place here.
In one corner there was a simple, narrow bed with a small bookcase over it. Toward the rear of the room was a desk with a computer console.
In a corner behind the desk was a doorway which led into a bathroom containing a sonic shower. Below a mirror was a sink that had no visible controls; the water came on automatically when hands were placed beneath the faucet, and went off when they were withdrawn.
Usually, the ready room would be decorated by its occupant by adding a number of personal ornaments.
[edit] Propulsion systems
Sovereign-class starships achieved warp flight through two warp nacelles, which housed multiple pairs of warp coils. Maximum speed was above warp 9. The warp drive was fitted with the latest advances in warp field design so that it avoided the damage to the fabric of space caused by previous models.
There were two impulse engines, both located at the aft of the saucer section.(Star Trek: First Contact)
Main engineering contained the controls for the warp and impulse drive systems. Entrance to the primary engineering spaces was provided by two large blast doors, a pair each deck on Decks 15 and 16, that could be closed for internal or external security reasons, as well as in case of emergencies. It was much larger than on previous starship classes and was split into three levels to accommodate the warp core, which spanned several decks.
The majority of controls were situated on the main deck (Deck 16) and an upper level gantry. Arranged around the warp core stack were a number of control consoles that could be reconfigured to emulate all the command controls on the bridge.
The largest work station was the master systems display, which was used to monitor the status of all key systems and could comfortably accommodate four personnel. There were also various wall displays, including a schematic that showed the 'health' of the warp propulsion system.
The deuterium tanks were above the core, while antimatter storage pods surrounded the base of the core. Two large cylindrical tanks were positioned next to the warp core and contained highly dangerous plasma coolant. Two rectangular power transfer conduits fed off from the warp reaction chamber and angle out of main engineering to the port and starboard warp nacelles.(Star Trek: Insurrection)
Additionally, there were numerous ladders and access panels to Jefferies tubes, leading throughout the starship. A second tier ringed the second level of main engineering on Deck 15. Two ladders on the opposite ends of the catwalk provided access. (Star Trek: First Contact) By 2379, Starfleet began implementing a force field system around the warp reactor. (Star Trek Nemesis)
It is unknown at this time exactly what role the reactor core force field played in protecting the ship. During its only shown use, the force field was disabled in battle mere minutes after it was activated. How this helps the ship is a mystery due to the lack of a force field around the reaction chamber. (However, this could possibly be to protect it when the engineering crew fights intruders.)
A similar tactic was employed in VOY: "Day of Honor" by B'Elanna Torres when she had a Level 10 force field surround USS Voyager's main engineering right before she ejected the warp core. It may also help contain a warp core breach and stop, or slow it, from spreading.
[edit] Tactical systems
The Sovereign-class starship had several weaponry enhancements over previous starship classes, including quantum torpedoes as well as photon torpedoes, more powerful phasers, and faster computer processing capabilities.
The Sovereign-class employed sixteen phaser arrays at key locations throughout the ship's hull. Seven dorsal phaser arrays were located on the primary hull, one extending around the saucer section, giving it an oval appearance. Six smaller arrays, covered the aft dorsal firing arcs and were located along the aft portion of the saucer section and above the main shuttlebay.
Four ventral phaser arrays were located on the primary hull, extending around in nearly a half circle on both the starboard and port ventral sides of the saucer section. A single phaser array was located along the ventral section of the engineering hull, running perpendicular to the hull.
During the refit, four were added to the trailing edges of her warp nacelle pylons (one dorsal and one ventral for each pylon).
In her original configuration, the Sovereign-class mounted five torpedo launchers. The "main" launcher was located on the ventral portion of the saucer on a turret, and was supplemented by one twin-tube launcher forward and aft at the bottom of the secondary hull.
The refit saw the addition of five more tubes: three on the dorsal saucer section (a single tube facing forward on Deck 3 and a twin-tube launcher facing aft [located above the aft saucer airlock]), and two to the secondary hull, both facing aft (one above and one below the secondary hull shuttlebay)
The Sovereign-class was normally outfitted with both photon and quantum torpedoes. (Star Trek: First Contact) (Star Trek Nemesis)
[edit] Deflector shields
Deflector shields serve as defense against enemy fire, hazardous radiation, and micro-meteoroid particles. The Sovereign-class starship's shields, when raised, stayed extremely close to the hull to conserve energy, the average range of which was approximately ten meters away from the hull. This could be extended at great energy expenditure, theoretically even to envelope another starship or object within close distance of the vessel. (Star Trek Nemesis)
[edit] Transporter systems
The Sovereign-class starship included at least three separate transporter rooms, capable of site-to-site transport. (Star Trek: First Contact) Unusually, the transporter console in a Sovereign-class transporter room was built into a wall opposite the transporter platform, from where the controls on the console could be seen. (Star Trek: Insurrection) The transporters could be operated from both the tactical and engineering stations on the ship's bridge. A Sovereign-class starship was capable of beaming a single small vessel - such as a Scorpion-class attack fighter - aboard, even if the smaller craft was mobile. (Star Trek Nemesis)
- A Sovereign-class transporter room made only a brief appearance in Star Trek: Insurrection. Its omission from Star Trek: First Contact was the first time in the Star Trek film series that the transporter room did not appear.
[edit] Escape pods
The Sovereign-class starship carried a number of escape pods. In the event of a catastrophic emergency, these pods served the same purpose as the lifeboats of a water-based vessel and ensured the continued survival of passengers and crew after the primary vessel had to be abandoned.
The escape pods were located throughout the Sovereign-class starship's primary and secondary hulls: there were two rows of pods on the dorsal side of the command saucer, and two on the ventral side. Further rows of pods lined each side of the engineering hull.
Unlike the escape pods utilized on the Galaxy- and Intrepid-class, (VOY: "Year of Hell") there was no outer hatch that opened for launch. Instead, the heat shield of the escape pod lay flush with the Sovereign-class ship's outer hull. Personnel entered the pods through hatches that lined sections of the ship's corridors, and a situation display monitor was located between the pods.
Each hatch swung open on a hinge at the bottom, creating a short ramp from the floor of the corridor into the interior of the capsule. The pods were equipped with heat shields for atmospheric entry and landing if a suitable planet could be found to set down on. (Star Trek: First Contact)
[edit] Crew support systems
The Sovereign-class starship had the usual array of amenities available to the crew, including holodecks, gymnasiums, a ship's library, etc.
- It seems that Sovereign-class starships do not have the extensive provisions for civilian personnel that her Galaxy-class predecessors were designed with, as we have yet to see any civilians on board. Married personnel, however, are permitted to share quarters. (Star Trek Nemesis)
[edit] Medical facilities
One large sickbay facility, located on Deck 7, served as the primary care facility on Sovereign-class starships. Equipped with six standard and one advanced biobed and an EMH (emergency medical hologram), sickbay was also home to the Chief Medical Officer's office and a small lab used for routine analysis of patients.
The room itself was considered to be general-purpose, often the location of regular crew physicals, appointments, and various medical emergencies - it could effectively handle the majority of situations that a starship crew would face. (Star Trek: First Contact)
Located near sickbay was the counselor's office, a modest room approximately the size of a standard living room compartment. (Star Trek: Insurrection)
[edit] Crew quarters
The arrangement of living quarters was designed to be modular, so that at any time a particular area could be reconfigured to create larger or smaller residential areas. Most living areas were located on the upper and lower surfaces of the saucer section, offering residents a remarkable view of the starscape outside their windows.
As is common on Starfleet vessels, the living accommodations for senior officers and VIPs were larger than standard crew quarters. Officers' quarters usually included a living area in the center of the dwelling, which held a personal workstation, couch, replicator and a small dining area.
Connected to this was a bedroom that featured a double-sized bed and room for personal belongings. Normally, the bedroom would be connected by a half-bathroom with wash basin, mirror, toilet, several drawers and a sonic shower. For senior staff, this bathroom was usually upgraded to a full-sized bathroom with bathtub. (Star Trek: Insurrection)
[edit] Auxilary spacecraft systems
Located at the dorsal stern of the primary hull, the main shuttlebay took up a significant portion of the aft section of Decks 6 through 9 on the Sovereign-class. Due to the mission profile of the Sovereign, the shuttlebay extended further than normal for a vessel its size to accommodate runabouts and several shuttlecraft.
The secondary shuttlebay was located at the very aft portion of the engineering hull. This bay, while smaller than the main facility, was just as capable of handling flight operations as the main shuttlebay. (Star Trek: First Contact)
In addition to shuttlecraft, the Sovereign class also featured a Captain's Yacht, designed for special diplomatic missions. The Yacht on board the Enterprise-E was named the Cousteau. (Star Trek: Insurrection)
[edit] Ships commissioned
- USS Enterprise (NCC-1701-E)
- USS Sovereign
[edit] Appendices
[edit] Appearances
- Star Trek films:
- DS9:
- "Sacrifice of Angels" (LCARS graphic)
- "Tears of the Prophets" (LCARS graphic)
- "What You Leave Behind" (LCARS graphic)
- VOY: "Drone" (LCARS graphic)
[edit] Background information
The Sovereign-class starship was designed by production designer Herman Zimmerman with illustrator John Eaves. Rick Sternbach did the working construction drawings of the model, which was built at Industrial Light & Magic.
The quantum torpedo launcher was made to look more sleek and streamlined for Star Trek: Insurrection when it was decided to add the captain's personal yacht to this area. This was carried over to how the vessel appeared in Star Trek Nemesis.
For Star Trek Nemesis, The Enterprise-E was slightly modified to make her look more streamlined like John Eaves's original design drawings intended. Extensions were added on the rear of the saucer along the inside edge of each impulse engine, which were then blended into the upper secondary hull. The warp engines were raised up and moved forward slightly, to give the ship a sleeker profile when looking at her from the side. The warp engine support pylons were also modified slightly to appear more streamlined. And the forward part of the secondary hull just under the navigational deflector dish was pulled up tighter to the dish itself.
There may be other minor differences on the ship between all three films that aren't mentioned because several physical and CG models were used.
Comments made by Rick Sternbach on the TrekBBS give the Sovereign-class a designation of Heavy Cruiser, a mass of 3,205,000 metric tons, an apparent crew complement of 855, and a maximum cruising speed of warp 9.9. He also stated that it was the intent that the Sovereign-class be the replacement for the Excelsior-class starship. The official cutaway poster of the vessel that was released for First Contact designates the ship as an "Explorer Type 2". These facts have yet to be confirmed in canon.
According to some production memos, the Enterprise-E was originally named the USS Honorius, but after the Enterprise-D was destroyed, the Honorius was renamed Enterprise in a similar fashion to the Enterprise-A, which was, according to Gene Roddenberry, supposed to have been renamed from the USS Yorktown.
It appears that the Sovereign class has at least two sickbay facilities, given sources in Star Trek: First Contact and Star Trek Nemesis that indicate sickbays on Decks 8 and 16. The Sovereign class isn't the first class of vessel to have several sickbays; we saw Beverly Crusher evacuating a sickbay in the engineering hull of the USS Enterprise-D in Star Trek Generations.
In production notes for Star Trek: First Contact, Michael Okuda suggested that the prototype for the Sovereign-class was the USS Sovereign and would have a registry in a range around NX/NCC-75000. This has resulted in several fans believing incorrectly that the registry of the Sovereign is NX-75000 or NCC-75000.
The Sovereign was also mentioned briefly in the Star Trek Encyclopedia, but the vessel itself has not been seen on screen to date.
[edit] Apocrypha
- Sovereign-class starships have been mentioned often in novels and games. A role-playing game supplement from Decipher mentions the Sovereign, Yorktown and Independence.
The class's prototype, the USS Sovereign, has appeared or been mentioned in several non-canon sources, such as the novels Spectre, Dark Victory and The Genesis Wave, Book 1, as well as Pocket Books' reference works release Starship Spotter. The Sovereign was also the ship the Player commanded in the later portions of the game Bridge Commander.
In the world of games, Star Trek: Bridge Commander and Star Trek: Legacy list a likely and widely-accepted registry number for Sovereign as NX-73811 (later NCC-73811). Other games mentioning Sovereign are the role-playing game supplements The Price of Freedom from Last Unicorn Games and Starships from Decipher.
In the video game Star Trek: Invasion, two Sovereign class vessels appeared: the USS Enterprise-E, and the USS Sentinel-B. The Enterprise-E is also the main base of operations in the game Star Trek: Elite Force 2.
The Sovereign-class is also the most powerful class available to the player in the game Star Trek: Armada, with the variant timeship USS Premonition also including a temporal weapon which allowed the player to pause time in local areas. This ship has never been mentioned anywhere else and due to the events of the game may never have existed (due to changes in the timeline by the player's actions.)
[edit] External links
- Sovereign class at Memory Beta, the wiki for licensed Star Trek works
- Sovereign Changes at Daystrom Institute Technical Library
- Sovereign Class Variations at Ex Astris Scientia
- Designing the Sovereign-class starship at Forgotten Trek
- Designing the Enterprise-E at Federation Starship Datalink
- Fan-made Sovereign Class Blueprints - Part of the Star Trek LCARS Blueprints Database
