Entertainment
 

Type 6 shuttlecraft

From Memory Alpha, the free Star Trek reference

(Redirected from Type-6 shuttlecraft)
Type 6 shuttlecraft
Shuttlecraft Justman, a type-6 shuttle

Shuttlecraft Justman, a type-6 shuttle

Affiliation: Federation Starfleet
Type: Shuttlecraft
Length: 6 meters
Crew complement: 2 pilots; additional crew as necessary
Armament: None standard; 2 Type IV phaser emitters for special operations
Defenses: Deflector shields
Aft section and interior of a type-6 shuttle prior to launch

Aft section and interior of a type-6 shuttle prior to launch

The type-6 shuttlecraft was a short-range Starfleet auxiliary vehicle carried aboard Federation starships and space stations during the 24th century. (TNG: "Parallels")

Contents

[edit] Service history

The type-6 shuttlecraft was introduced sometime prior to 2364. (TNG: "All Good Things...") They were part of the standard shuttlecraft inventory aboard Galaxy-class, (TNG: "Darmok") Intrepid-class, (VOY: "Caretaker", "Parallax") and Nebula-class (Star Trek Generations; DS9: "Waltz") starships. Space stations such as Relay Station 47 also supported type-6 shuttlecraft, as did facilities on Earth. (TNG: "Aquiel"; VOY: "Pathfinder")

Although the type-6 did not make its debut until the fifth season episode "Darmok," the type-6 shuttle Galileo was seen during the past scenes of "All Good Things...," establishing that this shuttle type was an unseen part of the USS Enterprise-D's inventory for four years. The type-6 also appears on the master systems displays of the Sovereign-class USS Enterprise-E, the Prometheus-class USS Prometheus, and the Nova-class USS Equinox, possibly indicating this shuttle is carried aboard those vessels as well. Additionally, the Star Trek: Deep Space Nine Technical Manual claims several type-6 shuttles are assigned to Deep Space 9, although there is no on-screen evidence to support this.

[edit] Technical data

Cross sections of a type-6 shuttlecraft

For propulsion, the type-6 was equipped with two 1250 millicochrane warp nacelles and microfusion thrusters. It was furthermore equipped with an RCS thruster quad, an atmospheric airscoop for atmospheric flight, and hover field antigravs. There was no standard armament, but the shuttlecraft could be equipped with two type 4 phaser emitters for special purposes. The shuttle also featured a navigational deflector and redundant graviton polarity source generators. (TNG: "The Outcast")

A transporter assembly was also not standard, but the shuttle could be fitted with a portable array. The control systems were intuitive, and a non-Federation pilot could quickly learn to fly the craft. (TNG: "The Outcast") Type-6 shuttles were easily configurable for testing of a variety of technologies. (TNG: "Suspicions")

Entry to the shuttle was through a large hatch in the rear of the vessel. The hatch could be opened via a control pad next to the impulse engines. There were benches for passenger seating in the aft section, and ample room for cargo. A separate systems display was also found in the aft area, as were storage bins. (TNG: "The Outcast", "Suspicions")

By 2374, deflector shields, phaser arrays, and transporter arrays were standard equipment on board type-6 shuttles. (VOY: "The Raven", "Coda")

[edit] List of type-6 shuttlecraft

[edit] USS Enterprise (NCC-1701-D)

According to the Star Trek: The Next Generation Companion, this shuttle was to have been named Hypatia.

[edit] USS Farragut (NCC-60597)

[edit] USS Honshu (NCC-60205)

[edit] USS Voyager (NCC-74656)

[edit] NCC-71325

Shuttle attached to NCC-71325

[edit] Relay Station 47

[edit] Starfleet Command

[edit] Background

The type-6 shuttle is a modification of one of the full-size shuttles built for Star Trek V: The Final Frontier. The changes were designed by Rick Sternbach, and mostly involved shortening the length of the shuttle and adding new warp engines. The distinctive front end of the shuttle as well as the aft hatch and impulse engines were retained. A new miniature was built under the supervision of Greg Jein. The designation was established in dialog in TNG: "Parallels".

Shuttlecraft "Curry"

This was the first (and last) complete full sized Starfleet shuttlecraft built for a Star Trek series, replacing the inaccurate type-7 shuttlecraft exterior created for TNG: "Unnatural Selection" and supplementing the tiny type 15 shuttlepod built for TNG: "Time Squared".

The special features of the TNG Season 6 DVD depicts a studio model of a Type 6 shuttlecraft labeled with the name "Curry" (versus "Curie"), named after Dan Curry. It is unclear if this studio model was ever used in any on-screen sequence.

On The Next Generation, reuse of stock shots of the type-7 were often incorrectly paired with the interior and sometimes exterior of the type-6. A similar phenomenon happened on Star Trek: Voyager, where the type-6 interior was shared with the type-8 shuttlecraft introduced in VOY: "Parallax", although the situation display to the left of the pilot always showed a diagram of the type-8. The type-6 was even rendered as a computer generated model, but after the introduction of the class 2 shuttle and later the Delta Flyer, both the type-6 and type-8 fell into disuse. The full-sized shuttle exterior was eventually recycled to become Alice from VOY: "Alice".

Rate this article: